{"product_id":"alltoo-bicycle-tube-end-facing-tool-kit-for-steerer-seatpost-handlebar","title":"ALLTOO Bicycle Tube End Facing Tool Kit for Steerer, Seatpost \u0026 Handlebar","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eFinish the cut. Check the fit. Ride with confidence.\u003c\/h2\u003e\n\u003cp\u003eAfter a steerer, seatpost or handlebar tube is cut, the end may still have burrs, high spots or a slightly uneven edge. The ALLTOO Bicycle Tube End Facing Tool helps smooth and level that final surface in short, controlled passes. It is designed for finishing work and small measured corrections, not for cutting a tube to length.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuided contact:\u003c\/strong\u003e The tube clamp and straight guide rod position the spring-loaded facing head over the cut end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled finish:\u003c\/strong\u003e The 100# marked abrasive disc helps tidy burrs and uneven edges while you check progress frequently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual or drill-assisted:\u003c\/strong\u003e Turn by hand for close control, or use a suitable drill at low speed with light pressure. A drill is not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFinishing a fork steerer after it has been cut to the measured length.\u003c\/li\u003e\n\u003cli\u003eCleaning up a rough seatpost or handlebar tube end before reassembly.\u003c\/li\u003e\n\u003cli\u003eMaking a small, measured end-face correction when the tube and component maker permit it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCheck fit before ordering\u003c\/h3\u003e\n\u003cp\u003eThe kit is designed for these \u003cstrong\u003enominal outside diameters\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFork steerer:\u003c\/strong\u003e 28.6 mm (1-1\/8 in) or 31.8 mm (OD2 \/ 1-1\/4 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeatpost:\u003c\/strong\u003e 25.4 mm, 27.2 mm or 31.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandlebar end:\u003c\/strong\u003e 22.2 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"margin:16px 0;padding:14px 16px;border-left:4px solid #f27a16;background:#fff6ee;\"\u003e\u003cp style=\"margin:0;\"\u003e\u003cstrong\u003eBefore you order:\u003c\/strong\u003e Measure the tube's actual outside diameter and check that the clamp and insert can hold it securely. The listed sizes are nominal; a matching number alone does not confirm fit.\u003c\/p\u003e\u003c\/div\u003e\n\u003ch3\u003eHow to use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eChoose the matching plastic insert, place the clamp around the tube and lock it securely.\u003c\/li\u003e\n\u003cli\u003eAlign the abrasive disc with the cut end using the guide rod.\u003c\/li\u003e\n\u003cli\u003eFace lightly by hand or with a suitable low-speed drill. Work in short passes and inspect often.\u003c\/li\u003e\n\u003cli\u003eRemove dust and debris, then check the finished edge and component fit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003eOne facing head and guide assembly, one orange plastic clamp with locking lever, one 100# marked abrasive disc, three orange plastic split inserts and one black U-shaped spacer. The demonstration tube and electric drill are not included.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eWill this fix a loose headset?\u003c\/h4\u003e\n\u003cp\u003eOnly if a confirmed steerer height or end-face issue is the cause. Check headset bearings, spacers, stem position and preload before removing material. Headset play may have other causes.\u003c\/p\u003e\n\u003ch4\u003eDo I need a drill?\u003c\/h4\u003e\n\u003cp\u003eNo. You can use the tool by hand. If using a suitable drill, keep the speed and pressure controlled; do not use impact mode.\u003c\/p\u003e\n\u003ch4\u003eCan I use it on a carbon tube?\u003c\/h4\u003e\n\u003cp\u003eFollow the tube and component manufacturer's instructions before facing carbon. Remove as little material as necessary, control dust and stop if you are unsure. A qualified bicycle mechanic can assess the setup.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"ALLTOO","offers":[{"title":"Default Title","offer_id":67769932972322,"sku":"10774","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/1732\/3554\/files\/bicycle-tube-end-facing-tool-01.png?v=1794386087","url":"https:\/\/alltoo.cc\/fr\/products\/alltoo-bicycle-tube-end-facing-tool-kit-for-steerer-seatpost-handlebar","provider":"ALLTOO\u0026GodLOL Cycling Tour","version":"1.0","type":"link"}